January 11, 2022

SD card does not format in Windows 11/10 [Fixed]

If you are unable to format your SD card on a Windows 11/10 PC, this article is sure to help. SD cards are used to store additional information. Now, you might want to format an SD card to clean up all the data on it. However, some users reported that they encountered the issue where their SD card just won’t format. If you are one of those users with the same issues, then this article is for you. In this article, we are going to mention some functional fixes that should help you format your SD card.

Before we talk about the functional fixes, let’s discuss the scenarios that do not allow you to format your SD card.

Why can’t I format my SD card?

There can be different reasons which could trigger this problem for individuals. Here are the most common causes that you cannot format your SD card:

  • In a general scenario, you are most likely facing this issue if write protect is enabled on your SD card. So make sure that the write protect is disabled on your SD card to be able to format your SD card successfully.
  • It is also possible that there are bad sectors on your SD card which will not let the SD card format. If the scenario applies, repartitioning the SD card should help resolve the issue.

How to fix SD card that won’t format?

To repair an SD card that does not format, make sure that write protection is applied to the SD card. Apart from that, you can try to format your SD card through command line interface, disk management tool or third party SD card formatting software. If these methods do not solve the problem, you can try repartitioning your SD card using DiskPart.

SD card does not format on Windows computer

Here are the methods you can try when the SD card won’t format:

  1. Remove write protection from the SD card.
  2. Format the SD card using the command prompt.
  3. Format the SD card with Disk Management.
  4. Repartition your SD card with DiskPart.
  5. Use a third party SD card format tool.

1]Remove write protection from SD card

The first thing to do is to try to remove the write protection on your SD card to fix the problem. Most likely the problem is caused if write protection is enabled on your SD card which prevents modification on the SD card. So, if the scenario is applicable, removing the write protection from the SD card will solve the problem.

If you are using a card reader, remove the card, then verify that there is a padlock written on the side. If so, then make sure it is not enabled. If there is no lock switch on the card, you can use the built-in Windows DiskPart utility to disable write protection on your SD card. Here’s how to do it:

First, open the Run dialog box using the Windows + R keyboard shortcut.

Now type disc part in the Open field, and then press Enter. This will open the Diskpart in the command prompt.

Then type the following command to display the list of active disks:

list disk

After that enter the command below where X is the disk number:

select disk X

Then write the command below to remove write protection:

attributes disk clear read-only

Finally, hit the Enter button and when the process is complete, close the command prompt.

See if you are now able to format your SD card or not. If not, you can try the next potential fix to fix the problem.

Read: Windows could not repair the drive – USB, SD card, or hard drive.

2]Format SD card using command prompt

If you are unable to format an SD card in the conventional way, you can try to format it using the command prompt. Here are the steps to do it:

First, open the command prompt as administrator.

Now enter the commands below into CMD one by one:

diskpart
list disk

Then select the disk number of your SD using the command below:

select disk X

In the above command, X is the disk number of the SD.

After that enter the command below:

format fs=ntfs quick

This should format your SD card.

If you are still unable to format your SD card, proceed to the next potential fix to resolve the issue.

See: Unspecified error while copying a file or folder.

3]Format SD card with disk management

Disk Management is a disk and partition management utility built into Windows. You can also use it to format your SD card. Here are the steps to format SD card using Disk Management on Windows PC:

  1. First, open the Disk Management tool from the search option on the taskbar.
  2. Now select the partition on the SD card which you need to format.
  3. Then right click on the partition and hit Format option.
  4. After that, manually enter the volume name, file system and allocation unit size and press the OK button.
  5. Finally, confirm the formatting process by clicking the OK button.

4]Repartition your SD card with DiskPart

If there are bad sectors on your SD card, then you might face the problem of unable to format SD card. If this scenario applies, you should be able to resolve the problem by repartitioning your disk. To do this, you can use the Windows DiskPart command line utility. It will clean the SD card and generate new partitions on it.

Here is how you can repartition SD card using DiskPart:

First, run the command prompt with administrator privileges like we did in method (2).

Now enter the commands below in the order shown:

diskpart
list disk
select disk X

In the 3rd command, X is the disk number of the SD card you need to format.

Then type the commands below and hit the Enter button:

clean
create partition primary

After that, to choose the partition you just created, enter the command below:

select partition 1

Then, to make the partition active, type and enter the following command:

active

You can now format the SD card by entering the command below:

format fs=ntfs label=SDCard quick

Now you can assign a letter to the partition to make it appear in the file explorer using the command below:

assign letter=h

Finally, exit the command prompt and see if the drive is active in File Explorer.

Read: Fix Please insert the last disk of the multiple volume bundle error.

5]Use third party SD card format tool

sd card formatter

If nothing works, you can try a third party SD card format tool to format your SD card. It could let you format your SD card without any problem. You can try this free software called SD memory card formatter. Correct Download and install this software and launch it on your PC. After that, format our SD card. Hope this will allow you to successfully format your SD card without any problem.

How to format corrupt SD card?

To format corrupt SD card, you can try to delete bad sectors present on SD card. You can also use a third party tool capable of formatting corrupted SD card.

That’s it!

Now read:


Source link